flag-usa USA


The Phantom v341 achieves 3Gpx/sec and comes with a 4Mpx 35mm format sensor, providing high detail to a broad range of high speed imaging applications. It has on-camera controls and dual HS-SDI, as well as a host of Phantom Features for flexible use in many applications. 

  • 800 fps at 2560 x 1600
  • Exposure Index Range:
    • Mono 6,400 – 32,000
    • Color 1,600 – 8,000
  • 8, 16, 32GB RAM
  • 128, 144, 256, 512GB CineMag II compatible

With 3Gpx /sec throughput, the Phantom v341 achieves 1,440 fps at 1920 x 1080 and 2,870 fps at 1280 x 800, while providing very high detail. It is compatible with the Phantom CineMag II, and can record directly into the CineMag at up to 195 fps at full resolution.

The v341 has the same Phantom Features and advanced features as the v641, and can easily be upgraded to achieve higher frame rates.

Key Features:

  • 4Mpx sensor with 10mm pixel size and 12-bit depth
  • Frame rate profile capability
  • Advanced Features:
    • Image-Based-Auto Trigger
    • Shutter-off for PIV
    • Quiet Fans
  • Up to 63 partitions in memory

What’s in the box?

  • Power supply with XLR extender
  • Ethernet Cable
  • Capture cable
  • Printed manual
  • Phantom PCC software
Resolution FPS
2560 x 1600 800
2048 x 1690 980
1920 x 1080 1,440
2048 x 1024 1,520
1280 x 1024 2,250
1280 x 800 2,870
800 x 600 4,510
640 x 480 6,880
512 x 512 8,390
256 x 256 22,100
256 x 128 38,700
256 x 64 61,800

Common resolutions and frame-rates, other resolutions available.
Short Description
  • The Phantom v341 provides a 4 megapixel sensor with almost 3 gigapixel/second throughput. That means full-resolution frame rates of 800 frames-per-second (fps), and a maximum of 130,000 fps at reduced resolution.
  • Almost 3 Gpx/second
  • Max speed at full resolution of 2560 x 1600 is 800 fps to RAM and 195 fps to CineMag
  • Max speed at reduced resolution of 256 x 8 is 130,000 fps to RAM
  • Min frame rate of 10 fps
Sensor Specifications
  • CMOS sensor
  • 2560 x 1600 pixels
  • 10 µm pixel size
  • 25.6 mm x 16.0 mm
  • 12-bit depth
  • ISO Monochrome 6,400 D
  • ISO Color 1,600 D
  • TE cooled
  • CAR in 256 x 8 increments
  • Fill factor: 70%
  • Dynamic range: 54.6 dB
  • Read out noise at 20.6°C (typical): 21e-
  • Full well capacity (typical): 11000e-
  • 1 us minimum exposure
  • Global electronic shutter
  • Extreme Dynamic Range (EDR)
  • Auto Exposure
  • Shutter Off mode for PIV
  • 8 GB, 16 GB and 32 GB high-speed internal RAM
  • CineMag compatible (128 GB, 256 GB, 144 GB, 512 GB)
Record Times
  • 7.4 seconds at maximum frame rate, maximum bit depth, largest resolution and into maximum internal memory
Special Features
  • Segment memory for up to 63 cines in multi-cine mode
  • Continuous recording
  • Frame rate profile
  • Memory gate
  • Event marking
  • Frame timestamp (IRIG or SMPTE)
  • IRIG in/out (modulated and unmodulated)
  • Shutter off mode for PIV exposure
  • 1.4 µs straddle time
  • Burst mode
  • Standard internal mechanical shutter for automatic/remote Current Session Reference (CSR)
  • Standard Image-Based Auto-Trigger (IBAT)
  • Two 12 VDC, 1.5 A auxiliary power ports
  • Secondary IP address
  • Field-based firmware upgrade capable
  • Programmable trigger location (pre/post trigger recording)
  • Image-Based Auto-Trigger optional
  • Trigger from software
  • Hardware trigger BNC
Timing and Synchronization
  • 20 ns timing resolution
  • Frame synchronization to internal or external clock (FSYNC)
  • IRIG in/out (modulated or unmodulated)
  • SMPTE timecode at support frame rates
  • Ready output
  • Strobe output
  • Genlock
  • Dedicated FSYNC, Trigger, Timecode In and Timecode Out (SMPTE & IRIG) BNCs on camera body
  • Range Data input on camera body (Fischer)
  • Capture cable with Ready, Strobe, IBAT-Trigger, Pre-Trigger, Analog Video
  • Additional signals, including Genlock, available with use of optional Break-Out-Box (BoB) Note: cannot use serial port on BoB and serial port on the camera at the same time. Powering the camera through the BoB using the standard AC power supply requires an adapter cable.
  • Gb Ethernet for both control and data
  • 10 Gb Ethernet via CineStream X2SR
Camera Control
  • Optional On-Camera Controls (OCC)
  • Phantom Camera Control (PCC)
  • Remote Control Unit (RCU), connects to Remote port
  • SDK available
Video Out
  • Analog video (NTSC or PAL) available on Capture Cable
  • Two identical 4:2:2 HD-SDI ports on camera
  • Component viewfinder port
  • Nikon F-mount standard, supports F & G style lenses
  • Canon EOS mount optional
  • PL-mount optional
  • C-mount optional
  • (lens not included)
Video Processing
  • Brightness
  • Gain
  • Gamma
  • Saturation
  • Hue
  • White Balance
  • Color interpolation algorith
  • Filters
  • Color matrix
  • Image flip and rotate
  • Crop
  • Scale
Data Acquisition
  • National Instruments M- and X-Series DAQ modules with integrated support in PCC
Motion Analysis
  • Basic measurements via Phantom Application:
  • Distance
  • Speed
  • Acceleration
  • Angles and Angular Speed
  • Manual and Automatic point collection for target tracking
  • Compatible with 3rd party solutions
Supported File Formats
  • Cine, Cine Compressed, Cine RAW, AVI, h.264 mp4, Apple ProRes .mov, Multipage TIFF, MXF PAL, MXF NTSC, Uncompressed QuickTime, Windows BMP, OS/2 BMP, PCX, TGA, TIFF, LEAD, JPEG, JTIF, RAW, DNG, DPX
  • 100 - 240 VAC, 220 Watt power supply included
  • There are two DC inputs on the camera back panel for hot-swapping power or providing battery backup when using AC power
Mechanical Specifications
  • Size (without lens, CineMag or handle): 11.5 x 5.5 x 5.0 inches (L x W x H); 29.2 x 14 x 12.7 cm
  • Weight (without lens or CineMag): 11.75 lb; 5.33 kg
Environmental Specifications
  • Temperature and Humidity: 0°C - 40°C @ 8% to 80% RH
  • Shock: 30G, half sine wave, 11 ms, 10 times all axes (without CineMag or lens)
  • Vibration: 25G, 5-500 Hz, all axes without CineMag
  • Phantom SDK
  • LabView
  • MatLab
Ships Standard With
  • Power supply
  • Ethernet cable
  • Capture cable
  • Phantom PCC software
  • Getting Started Guide
  • Image-Based Auto-Trigger
  • Internal Mechanical Shutter
  • CineMag interface
  • Canon EOS lens mount
  • PL-mount
  • On-camera controls
Popular Accessories
  • CineMag
  • CineStation
  • RCU
  • CineStream
  • Break-out-Box (IRIG-in, IRIG-out, NTSC/PAL Video, Trigger, Event, Strobe, A-Sync, Pre-Trigger/Memgate, Ready, GenLock)
Pickle Switch, 6' (2m) Cable

Pickle Switch, 6' (2m) Cable

Pickle Switch. Connect to the Trigger port on camera or Capture cable, breakout box or Mini-BOB for manually triggering a camera with the press of a button.
Riser for Phantom Flex, Flex4K and vXX1 Cameras

Riser for Flex, Flex4K and vXX1 Cameras

This Riser brings your Phantom camera to the correct height for standard Arri 19mm Baseplates (BP-8, BP-9), and features through holes for lightweight 15mm rods to support a wide variety of cine-style accessories.
Phantom CineMag II

Phantom CineMag II

Phantom CineMag II compatible with v641, v642, v711, and legacy Flex(2K), vxx10 and vxx11 camera models.  Available in 144GB, 256GB and 512GB sizes.
EOS Lens Mount for UHS (VXXXX), V-series (VXXX) and Flex2K Cameras

EOS Lens Mount for UHS, V-series, and Flex2K

Canon EOS Lens Mount for Phantom UHS (VXXXX), V-Series and Flex2K Cameras. Provides electronic aperture and focus control.  
C Lens Mount for UHS (VXXXX), V-series (VXXX) and Flex2K cameras

C Lens Mount for UHS, V-series, and Flex2K

C Lens Mount for Phantom UHS (VXXXX), V-Series and Flex2K Cameras.
image of v341


(png; 3936*3024)