flag-usa USA

C210

The Phantom Miro C210 is a standalone version of our Miro C210J camera. The small, light, and rugged body, combined with a sensor of small pixels, makes this high detail camera perfect for microscopy work.

  • 1,800 fps at 1280 x 1024
  • Exposure Index Range:
    • Mono 2,500 – 12,500
    • Color 640 – 3,200
  • Memory Capabilities
    • 8, 16, GB RAM
    • 128GB internal, non-removable CineFlash
  • 1.3 Mpx, 5.6 micron pixel size
DOWNLOAD DATASHEET

The Phantom Miro C210 houses the 128GB internal CineFlash memory inside a small, rugged body and is capable of up to 67,000 fps at smaller resolutions.  This is perfect for many applications and experiments as it allows up to 13 individual 8GB shots, or 63 separate partitions to be saved before downloading is necessary.  These features help to keep laboratory workflow smooth and efficient.

The Miro C210 also has an internal, non-removable battery that is configurable for a variety of situations and can run for up to 10 minutes.  This gives some untethered flexibility in the case of accidental power cable severance. 

The 1.3 Mpx sensor with 12-bit depth and tightly packed 5.6 micron pixels produces highly detailed images.  When combined with the advanced features shots are delivered quickly with clear detail.

Key Features:

  • 1.3 Mpx sensor
  • Internal Battery
  • Up to 16GB RAM for 4.2 seconds record time
  • Up to 63 partitions possible
  • Advanced features:
    • Image-Based Auto Trigger
    • SYNC-to-Trigger
    • Quiet Fans

What’s in the box?

  • Power Supply with XLR extender
  • Ethernet cable
  • DIN 1.0/2.3 cable for SDI
  • MiniBOB
  • Printed Manual
  • Phantom PCC software
Resolution FPS
1280 x 1024 1,800
1280 x 720 2,540
768 x 768 2,385
768 x 576 3,150
640 x 480 3,760
512 x 512 3,530
512 x 384 4,650
384 x 288 6,100
256 x 256 12,700
128 x 64 22,380
64 x 8 67,140
Common resolutions and frame-rates, other resolutions available.
Short Description
  • Small, light, and versatile, the Miro C210 is the "go-to"camera for a variety of applications. It achieves 1,800 fps at full 1.3 Megapixel resolution of 1280 x 1024, comes with a 128GB internal CineFlash for nonvolatile memory, and is available with either 8GB or 16 GB of RAM.
Throughput/Speed
  • 2.3 Gpx/s Maximum speed at full resolution of 1280 x 1024 is 1,800 fps. Maximum speed at reduced resolution of 64 x 8 is 67,140 fps. Minimum frame rate at all resolutions is 100 fps.
Sensor Specifications
  • CMOS sensor
  • 1280 x 1024 pixels
  • 5.6 µm pixel size
  • 9.18 mm diagonal
  • 12-bit depth
  • ISO Monochrome 2,500D; 5,000T
  • Color 640D; 640T adjustable
Exposure
  • 5 µs minimum exposure
  • Auto Exposure
Memory
  • 8GB or 16GB internal RAM, 128GB internal, non-removable CineFlash
Record Times
  • 4.2 seconds at maximum frame rate, 12-bit depth, largest resolution and into maximum internal memory (16GB)
Special Features
  • Segment memory for up to 63 cines in multi-cine mode
  • Image-Based Auto-Trigger
  • Continuous recording
  • Memory gate
  • Event marking
  • Frame timestamp
  • IRIG In (modulated or unmodulated)
  • IRIG Out (unmodulated)
  • Secondary IP address
  • Field-based firmware upgrade capable
Triggering
  • Programmable trigger location (pre/post trigger recording)
  • Image-Based Auto-Trigger standard
  • Trigger from software
  • Hardware trigger BNC on MiniBob and Miro Junction Box
Timing and Synchronization
  • 20ns timing accuracy
  • Frame synchronization to internal or external clock (FSYNC)
  • IRIG In (modulated or unmodulated)
  • IRIG Out (unmodulated)
Signaling
  • Capture connector (Trigger, IRIG In, IRIG Out, Aux1, Aux2)
  • Aux1 signal can be assigned to FSYNC, Event, Strobe or Memgate.
  • Aux2 signal can be assigned to Ready or Strobe.
Ethernet Connection
  • Gb Ethernet for control and data. C210: Ethernet is accessed through an Ethernet cable with a Fischer connector.
Camera Control
  • Phantom Camera Control software (PCC)
  • Multi-Cam software
  • Remote Control Unit (RCU): Both C210J and C210 have "remote" connectors to connect to an RCU
  • SDK available
Video Out
  • HD-SDI available through DIN 1.0 / 2.3 connector on front of the cameras
Lensing
  • The C210 and C210J have 1" C-lens mounts that can be reversed to accept CS lenses.
Video Processing
  • Brightness
  • Gain
  • Gamma
  • Saturation
  • Hue
  • White Balance
  • Color interpolation algorithm
  • Flare
  • Pedestal
  • Tone curve
  • Filters
  • Color matrix
  • Image flip and rotate
  • Crop
  • Scale
Data Acquisition
  • National Instruments M- and X-Series DAQ modules with integrated support in PCC
Motion Analysis
  • Basic measurements via Phantom Application:
  • Distance
  • Speed
  • Acceleration
  • Angles and Angular Speed
  • Manual and Automatic point collection for target tracking
  • Compatible with 3rd party solutions
Supported File Formats
  • Cine, Cine Compressed, Cine RAW, AVI, h.264 mp4, Apple ProRes .mov, Multipage TIFF, MXF PAL, MXF NTSC, Uncompressed QuickTime, Windows BMP, OS/2 BMP, PCX, TGA, TIFF, LEAD, JPEG, JTIF, RAW, DNG, DPX
Power
  • 16 - 32 VDC, 12 W, 18W during battery charge.
  • 65 Watt 100 - 240 VAC power supply included.
  • Rechargeable battery for back-up.
Mechanical Specifications
  • 2.9 x 2.9 x 3.25 inches, 73 x 73 x 82.5 mm (H x W x D)
  • without lens or lens mount. Weight: 1.2 lbs, 0.54 kg (without lens)
Environmental Specifications
  • Operating Temperature: 0°C - 50°C
  • Storage Temperature: -20°C to +70°C
  • Shock:170G IAW MIL-STD 202G (without lenses)
  • Vibration: 24 Grms, IAW MIL-STD 202G (without lenses)
APIs
  • Phantom SDK
  • LabView
  • MatLab
Ships Standard With
  • Power supply
  • Ethernet cable
  • Miro MiniBoB
  • DIN 1.0/2.3 cable
  • PCC software
Popular Accessories
  • Remote Control Unit
  • DIN 1.0 / 2.3 cable
  • Miro Junction Box
Pickle Switch, 6' (2m) Cable

Pickle Switch, 6' (2m) Cable

Pickle Switch. Connect to the Trigger port on camera or Capture cable, breakout box or Mini-BOB for manually triggering a camera with the press of a button.
Miro C 1.0/2.3 DIN cable

Miro C 1.0/2.3 DIN cable

1.0/2.3 DIN to BNC cables, with female connectors for HD/SDI in Miro C210, C210J
Miro J-Box Adapter cable

Miro J-Box Adapter cable

Adapter cable to connect VEO, Miro LC/R/M, Miro C210 to System cable for use with Miro J-Box 2.0

The Miro Junction Box 2 (VRI-Miro-JB-2) accepts up to 6 Miro cameras at once.  The Miro C210J uses a System Cable, all other Miro cameras require a Miro C Capture or System adapter Cable. 

Up to 4 VEO S-model cameras are also compatible with the Miro-JB-2 (not the original Miro-JB).  A JB Capture (or system adapter) cables are required for each camera. 

VEO L-model and V-Series cameras are not compatible.

We test the ISO of every Phantom camera model to the industry standard ISO 12232. We use the SAT method which we believe is the best method for determining a sensor's sensitivity. The SAT method does not use gain to boost sensitivity. When using gain to increase sensitivity, you also boost the noise level. A gain adjustment to boost sensitivity is available on all Phantom cameras using image processing tools, if increased noise can be tolerated.

Per the spec, we will often publish both a Daylight (D) and a Tungsten (T) value because the source of illumination has a significant bearing on the result, particularly with monochrome sensors. When T or D is not specified, it can be assumed that the value published is the Daylight variant.

Please note that most modern Phantom cameras include Exposure Index control, which will boost the apparent ISO through the use of pre-defined tone curves that get applied to the raw images. The exposure index (EI) range is specified by Vision Research per camera model to ensure optimal image quality throughout the range.
We do not manufacturer specialized enclosures such as underwater housings directly. There are manufacturers of underwater housings on the market compatible with Phantom cameras. Here are a few examples:

Gates has a specialized housing for the Flex4K: https://www.gateshousings.com/flex-4k/

Nauticam has an underwater housing for the Phantom VEO (all S-model VEO) https://www.nauticam.com/

Prevco is a subsea engineering consultancy and manufacturer specializing in submersible pressure vessels, instrumentation housings, junction boxes, vent plugs, pressure relief valves and other accessories, also compatible with Phantom cameras

If you supply underwater housings or know of another supplier, please let us know so we can add to this list.
Most Phantom cameras come with a fixed amount of high-speed dynamic RAM. When the camera is in the pre-trigger mode (you've pressed "Capture" in the user interface), the camera is continuously recording images into that memory. When it gets to the end of memory, it cycles back to the beginning and continues recording, constantly overwriting itself – until the camera is triggered. This behavior is called "circular buffer recording".

What you end up actually saving in memory is a function of how you've set up your trigger. It can be set so that only frames that occur after the trigger are saved (100% post trigger). In this mode, once the trigger is pressed any images already in memory are overwritten and you record until memory is full, then it stops. If you set the trigger to stop the recording (0% post trigger) and save all frames up to the time of the trigger, the camera will simply stop recording upon the trigger and all the frames in memory before the trigger will be saved. Finally, you can set the trigger anywhere in the middle, for example having 90% of the recorded movie be what happens prior to the trigger and 10% after the trigger.
Yes you can!  Information on discontinued Phantom cameras is archived. Information on most legacy products can be found in the ‘Support by Model’ section at www.phantomhighspeed.com/support
The Phantom RCU is a legacy solution for Flex, Miro and v-Series models. The Bluetooth dongle that was designed for the RCU also works with the handheld PCU from AbelCine, which is also compatible with most modern Phantom cameras. The Bluetooth dongle is needed for wireless connectivity with the RCU or PCU and connects to Phantom cameras with a “Remote port” (v-Series, UHS and Flex cameras). Note that Miro and VEO camera models do not have a ‘Remote’ port directly on the camera body. However, VEO cameras can be connected using the CAMEO VEObob accessory.
There are two third-party solutions that Vision Research recommends highly because they work for ALL Phantom cameras over their Ethernet connection:
  • The Semote handheld remote controller includes a handheld unit and camera unit to transmit the signal. This device provides a connection up to approximately 30 meters.

  • The iPhantom app works on any Apple IOS device, and connects to any Phantom camera that has a WiFi router attached to the camera. This is particularly great for VEO S-model cameras (with firmware after version 106), because those cameras include a USB port for a USB WiFi dongle available from Vision Research.

We offer hands-on training for Phantom cameras at our Wayne, New Jersey facility. The two-day class has both lecture and labs for the best learning experience. This class is targeted at applications where the cameras will be used for scientific and engineering applications.
On-site training is available.

For customers outside of North America, who prefer local training, most of our International Sales Partners offer training courses tailored to your needs.

If your application is TV or Motion Picture production, consider training courses targeted at those applications from AbelCine, or other Phantom resellers around the world who focus on the "entertainment" market.
Yes. Look in the General Support Documents page for the CE Declarations here: phantomhighspeed.com/support
Vision Research welcomes slow motion videos from our industrial users as well as our entertainment customers. Submission is easy. Send us an email (phantom@ametek.com ) that explains what you’d like to share. In the body of the email give us all the details about your shoot, equipment used, workflow and anything else you think we need to know. We will send you a permission to use form to complete. This form gives us permission to use your footage and tells us how to credit your work. Once we get the completed form, we’ll work with you to get the footage (we prefer the original cine file). Then, we’ll post your high speed video in the Gallery and on our YouTube channel. Slow motion videos in our Gallery are rotated on a weekly basis and randomly chosen for inclusion into the Gallery.
Vision Research sends out a monthly newsletter that includes product announcements, featured projects and other news. Fill out a Contact form to be added to our email list! http://www.phantomhighspeed.com/Contact-Us/Contact-Form
All Phantom v-Series cameras with the Airborne option (these are no longer shipping) are classified as ECCN 7A994.

All Phantom Miro Airborne and Miro Airborne HD cameras (these are no longer shipping) are classified as ECCN 9A991D.

Any Phantom camera with the FAST option installed (typically this gives you frame rates >= 1,000,000 fps and/or digital exposures < 1 microsecond) such as the Phantom v611, v711, VEO 710 and the Ultrahigh-speed 10, 11, and 12 Series are classified as ECCN 6A003 and are export controlled.

Cameras with ECCN 6A003 can only be exported to these countries with no license required (NLR):
Australia, Austria, Belgium, Bulgaria, Canada, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Japan, Latvia, Luxembourg, Netherlands, New Zealand, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, South Korea, Spain, Sweden, Switzerland, Turkey, United Kingdom.

All other countries require an export license.

All other Phantom cameras are classified as ECCN EAR99.

Miro C Eggsplosion

Recorded with a Phantom Miro C110 at 1,000 fps

Miro C210 Side

Miro C210 Side

(png; 1345*949)
image C210 connectors

Miro C210 Connectors

(png; 5616*3744)
Miro C210 Tripod

Miro C210 Tripod

(png; 3000*3000)