flag-usa USA

S640

The Phantom S640 provides up to 6 Gpx/sec (75 Gbps) of data throughput for Machine Vision applications.  It leverages the popular and proven VEO640 sensor to deliver high quality 4 Mpx images.

  • Up to 1,480 fps at 2560 x 1600
  • Global Shutter
  • 8 and 12-bit selectable
  • GenICam protocol compliant
DOWNLOAD DATASHEET

The Phantom S640 supports cutting edge machine vision applications with up to 6Gpx/sec throughput provided through up to 16 CXP6 channels. A mechanical shutter and EOS lens compatibility allow remote black referencing and focus control to improve image quality. The S640 also comes with It comes with GPIO for Trigger, Event, Memgate, Strobe, and Ready signals, and Time Code In/Out with a time stamp on the frame.  

Key Features:

  • 4Mpx sensor with 10 µm pixel size and 12-bit depth
  • Data streams in up to 2, 4, or 6 Gpx/sec
  • GPIO for trigger and signaling
  • Record to DVR for long record time applications
  • Stream data directly to 4-port or 8-port frame grabbers
  • EOS lens compatible for remote focus
  • Mechanical shutter for remote black referencing
  • CXP6 and GenICam protocol compliant
  • Data conservation through reduced resolutions and 8-bit selection

 

What’s in the box?

  • Power supply with XLR extender
  • Printed manual
Resolution FPS
2560 x 1600 1,480
1920 x 1280 2,340
1920 x 1088 2,750
1280 x 720 5,640
640 x 480 12,060
128 x 16 200,715
Common resolutions and frame-rates, other resolutions available.
Short Description
  • The Phantom S640 brings the high-speed capabilities of the popular Phantom VEO 640 to Machine Vision. The S640 has a proven Phantom 4Mpx sensor and can stram up to 6Gpx/sec via CXP6. 
Throughput/Speed
  • 6Gpx/sec (75 Gbps)
  • Full resolution 1,480 fps
  • At 128 x 16 maximum fps is 200,715
Sensor Specifications
  • Phantom CMOS sensor
  • 12-bit pixel depth
  • 2560 x 1600 pixels
  • 10 µm pixel size
  • 30.18mm diagonal
  • Noise: 20.5e-
  • Dynamic Range: 55.9dB
  • CAR in 128 x 16
  • Global Shutter
  • ISO Monochrome: 6400D
  • ISO Color: 1250D
     
Exposure
  • 1μs minimum exposure
Memory
  • NA - the S640 streams data immediately into customer-provided frame-grabbers or DVRs
Record Times
  • Dependent on customer storage
Special Features
  • Configurable to stream up to 2Gpx/sec, 4Gpx/sec, or 6Gpx/sec
  • Selectable 8-bit and 12-bit output
  • Mechanical Shutter for black reference
Triggering
  • Trigger either through Software or GPIO trigger signal
Timing and Synchronization
  • Time Code In/Out
Signaling
  • GPIO:Event In, Trigger In, Memgate
  • Strobe Out, Trigger Out, Ready
  • Software Trigger Out
Ethernet Connection
  • Up to 16 CoaXPress (CXP 6) channels, provided in banks of 4 channels each
Camera Control
  • GenICam compliant
Lensing
  • Nikon F-mount standard, supports F & G style lenses
  • Canon EOS mount optional (Manual focus only)
  • C-mount optional
  • (lens not included)
Video Processing
  • Video processing capabilities through GenICam
Power
  • 20 - 28 VDC, 45 W
  • 65 Watt 100 - 240 VAC power supply available
Mechanical Specifications
  • Size (without lens mount) 14.5 x 14.5 x 19.0 cm (L x H x W); 5.7 x 5.7 x 7.5 in.
  • Weight: 1.62 Kg (3.6 Lb.)
Environmental Specifications
  • Operating Temperature: -10°C - +50°C
Ships Standard With
  • Getting Started Guide
  • Power Supply
Options
  • Canon EOS lens mount
  • C-mount
Popular Accessories
  • 65-Watt Power supply
  • GPIO cable
  • CXP Cables
  • Frame Grabber cards
Miro C110 Power Supply

Miro Power Supply

65W power supply for Miro C110, S640, and S990
EOS Lens Mount for VEO and Miro M/R/LC/Lab Series Cameras

EOS Lens Mount for VEO and Miro M/R/LC/Lab Series Cameras

Canon EOS Lens Mount for Phantom VEO and Miro M/R/LC/Lab Series Cameras. Provides electronic aperture and focus control.  NOT Compatible with VEO4K models.
C-Mount Lens Mount for Phantom VEO and Miro M/R/LC/Lab Series Cameras

C-Mount Lens Mount for Phantom VEO and Miro M/R/LC/Lab Series Cameras

C-Mount Lens Mount for Phantom VEO and Miro M/R/LC/Lab Series Cameras
CXP cable

CXP Cable

The CXP cable makes continuous imaging possible. 
No, you do not need to use all 16 CXP ports.  You can use just 1 Bank of 4 ports, 2 Banks of 4 ports (for 8 ports), or all 4 Banks of 4 ports (for 16 ports). The transfer rate will be lower, because each CXP port can transfer only approximately ½ Gpx/sec, so either your frame rate or resolution (or both) will need to be lower.
Yes! Start with Bank A (bottom left of the camera), then Bank B, and so on.
The S640 and the S990 use a bit more power than typical machine vision cameras, so they do not have Power over CXP. They use 20-28 VCD. You may either supply your own power, or purchase a power supply from Vision Research. 

The S210, S200, S640, and S990 don’t use PCC – PCC communicates to traditional Phantom cameras using the telnet interface and our telnet protocol, while these cameras are controlled through the GenICam protocol, then users can process the images directly on their systems.

 No, you don’t need to - You may also control the camera through CXP and GenICam. The GPIO is an alternative method. You may either design your own GPIO cable or purchase one from Vision Research.

We test the ISO of every Phantom camera model to the industry standard ISO 12232. We use the SAT method which we believe is the best method for determining a sensor's sensitivity. The SAT method does not use gain to boost sensitivity. When using gain to increase sensitivity, you also boost the noise level. A gain adjustment to boost sensitivity is available on all Phantom cameras using image processing tools, if increased noise can be tolerated.

Per the spec, we will often publish both a Daylight (D) and a Tungsten (T) value because the source of illumination has a significant bearing on the result, particularly with monochrome sensors. When T or D is not specified, it can be assumed that the value published is the Daylight variant.

Please note that most modern Phantom cameras include Exposure Index control, which will boost the apparent ISO through the use of pre-defined tone curves that get applied to the raw images. The exposure index (EI) range is specified by Vision Research per camera model to ensure optimal image quality throughout the range.
We do not manufacturer specialized enclosures such as underwater housings directly. There are manufacturers of underwater housings on the market compatible with Phantom cameras. Here are a few examples:

Gates has a specialized housing for the Flex4K: https://www.gateshousings.com/flex-4k/

Nauticam has an underwater housing for the Phantom VEO (all S-model VEO) https://www.nauticam.com/

Prevco is a subsea engineering consultancy and manufacturer specializing in submersible pressure vessels, instrumentation housings, junction boxes, vent plugs, pressure relief valves and other accessories, also compatible with Phantom cameras

If you supply underwater housings or know of another supplier, please let us know so we can add to this list.
Most Phantom cameras come with a fixed amount of high-speed dynamic RAM. When the camera is in the pre-trigger mode (you've pressed "Capture" in the user interface), the camera is continuously recording images into that memory. When it gets to the end of memory, it cycles back to the beginning and continues recording, constantly overwriting itself – until the camera is triggered. This behavior is called "circular buffer recording".

What you end up actually saving in memory is a function of how you've set up your trigger. It can be set so that only frames that occur after the trigger are saved (100% post trigger). In this mode, once the trigger is pressed any images already in memory are overwritten and you record until memory is full, then it stops. If you set the trigger to stop the recording (0% post trigger) and save all frames up to the time of the trigger, the camera will simply stop recording upon the trigger and all the frames in memory before the trigger will be saved. Finally, you can set the trigger anywhere in the middle, for example having 90% of the recorded movie be what happens prior to the trigger and 10% after the trigger.
Yes you can!  Information on discontinued Phantom cameras is archived. Information on most legacy products can be found in the ‘Support by Model’ section at www.phantomhighspeed.com/support
The Phantom RCU is a legacy solution for Flex, Miro and v-Series models. The Bluetooth dongle that was designed for the RCU also works with the handheld PCU from AbelCine, which is also compatible with most modern Phantom cameras. The Bluetooth dongle is needed for wireless connectivity with the RCU or PCU and connects to Phantom cameras with a “Remote port” (v-Series, UHS and Flex cameras). Note that Miro and VEO camera models do not have a ‘Remote’ port directly on the camera body. However, VEO cameras can be connected using the CAMEO VEObob accessory.
There are two third-party solutions that Vision Research recommends highly because they work for ALL Phantom cameras over their Ethernet connection:
  • The Semote handheld remote controller includes a handheld unit and camera unit to transmit the signal. This device provides a connection up to approximately 30 meters.

  • The iPhantom app works on any Apple IOS device, and connects to any Phantom camera that has a WiFi router attached to the camera. This is particularly great for VEO S-model cameras (with firmware after version 106), because those cameras include a USB port for a USB WiFi dongle available from Vision Research.

We offer hands-on training for Phantom cameras at our Wayne, New Jersey facility. The two-day class has both lecture and labs for the best learning experience. This class is targeted at applications where the cameras will be used for scientific and engineering applications.
On-site training is available.

For customers outside of North America, who prefer local training, most of our International Sales Partners offer training courses tailored to your needs.

If your application is TV or Motion Picture production, consider training courses targeted at those applications from AbelCine, or other Phantom resellers around the world who focus on the "entertainment" market.
Yes. Look in the General Support Documents page for the CE Declarations here: phantomhighspeed.com/support
Vision Research welcomes slow motion videos from our industrial users as well as our entertainment customers. Submission is easy. Send us an email (phantom@ametek.com ) that explains what you’d like to share. In the body of the email give us all the details about your shoot, equipment used, workflow and anything else you think we need to know. We will send you a permission to use form to complete. This form gives us permission to use your footage and tells us how to credit your work. Once we get the completed form, we’ll work with you to get the footage (we prefer the original cine file). Then, we’ll post your high speed video in the Gallery and on our YouTube channel. Slow motion videos in our Gallery are rotated on a weekly basis and randomly chosen for inclusion into the Gallery.
Vision Research sends out a monthly newsletter that includes product announcements, featured projects and other news. Fill out a Contact form to be added to our email list! http://www.phantomhighspeed.com/Contact-Us/Contact-Form
All Phantom v-Series cameras with the Airborne option (these are no longer shipping) are classified as ECCN 7A994.

All Phantom Miro Airborne and Miro Airborne HD cameras (these are no longer shipping) are classified as ECCN 9A991D.

Any Phantom camera with the FAST option installed (typically this gives you frame rates >= 1,000,000 fps and/or digital exposures < 1 microsecond) such as the Phantom v611, v711, VEO 710 and the Ultrahigh-speed 10, 11, and 12 Series are classified as ECCN 6A003 and are export controlled.

Cameras with ECCN 6A003 can only be exported to these countries with no license required (NLR):
Australia, Austria, Belgium, Bulgaria, Canada, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Japan, Latvia, Luxembourg, Netherlands, New Zealand, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, South Korea, Spain, Sweden, Switzerland, Turkey, United Kingdom.

All other countries require an export license.

All other Phantom cameras are classified as ECCN EAR99.

Understanding Streamer Functionality

Engineers from Vision Research discuss the technology behind streaming high-speed cameras.

S640 Front

S640 Front

(png; 3056*2638)
S640 Back Left Wire

S640 Left Back Cables

(png; 3056*2638)
S640 Left Wire

S640 Left Cables

(png; 3056*2638)
S640 Right

S640 Right

(png; 3056*2638)
S640 Right Wire

S640 Right Cables

(png; 3056*2638)