Choose your language:

Miro C-Series Cameras

Phantom Miro N5

  • System of 3 simple, interchangeable components:
    • Miro N5 camera head,
    • CXP cable,
    • Miro N-JB Base
  • 560 fps at 768 x 600, 1,000 fps at 512 x 472
  • 10 bit, 0.5 megapixel CMOS sensor
  • ISO Color 400D*, 400T*; Mono 2000D*, 4000T
  • Hi-G: 170G Shock, 20.7Grms Vibe
  • Small: 32 mm x 32 mm x 29 mm (H x W x D)
  • Modular: Connect to Miro Junction Box for multi-camera configurations

The new Phantom® Miro® N-Series brings Vision Research’s high-speed imaging technology to the smallest and harshest of environments.  Thanks to the 32mm cube shaped camera head (the Miro N5) being completely removed from the camera body the Phantom Miro N-Series gives users the ability to capture images from locations and angles that were never before accessible.

Size: Measuring just 32mm x 32mm x 29mm, the camera head of the Phantom Miro N-Series, the Miro N5, is incredibly small, and can be mounted just about anywhere.  Coupled with its hi-G construction (tested to withstand impacts up to 170G), this camera is ideally suited for hostile and extreme environments, such as auto crash and aerospace testing. At its full resolution of 768x600, the Miro N5 delivers 560 frames-per-second (fps) and can achieve 9,055 fps at lower resolutions.

Data Security: Data security is absolutely critical for any high-impact environment. The Miro N5 camera head is separate from the data storing base, the Miro N-JB base. If the head is destroyed or the cable is severed, any images captured by the camera head are instantaneously transferred to the camera base via a CXP cable and CoaXPress protocol where they’re safely stored in the onboard 8GB of RAM or 128GB of non-volatile CineFlash memory. The Miro N-JB base also has a battery backup to ensure data is saved in the event of power loss.

Affordability: Due to the nature of auto crash and aerospace testing, the risk of damage to expensive high-speed camera equipment is a very real possibility. Having to replace entire camera systems can prove to be quite costly; however, thanks to the Phantom Miro N-Series’ engineering and separation of the camera head from the camera base, this is no longer the case. Should the camera head be destroyed, new Miro N5 heads can be purchased and swapped into existing setups at a nominal cost.

What’s in the Box (for complete N-Series system of Miro N5 and Miro N-JB): 

  • Getting Started Manual 
  • PCC Software
  • Starter S-mount lens
  • Locking ring & hex key

* Measured according to ISO 12232:2006 method

 

Resolution
FPS

Common resolutions and frame-rates, other resolutions available

Short Description
  • The Miro N-Series is comprised of the tiny, Hi-G Miro N5 camera head, CXP cable, and the Miro N-JB base. The Miro N5 fits into the smallest spaces, images are transferred instantaneously to the Miro N-JB Base, to securely save them.
Throughput/Speed
  • 250 Mpx/second
  • Max speed at full resolution of 768 x 600 is 560 fps, maximum speed at reduced resolution of 128 x 32 is 9,055 fps.
  • Min frame rate of 30 fps.
Sensor Specifications
  • CMOS Sensor
  • 768 x 600 pixels
  • 10-bit
  • 4.8 x 4.8 um pixel size
  • 4.8 mm diagonal (4.68 mm diag)
  • ISO - Monochrome 2,000D; 4,000T
  • ISO - Color 400D; 400T
Exposure
  • 30 µs minimum exposure
  • Extreme Dynamic Range (EDR)
Memory
  • 8GB internal RAM, 128GB internal, non-removable CineFlash
Record Times
  • 21 seconds at maximum frame rate, 10-bit depth, largest resolution and into maximum internal memory
Special Features
  • Segment memory for up to 63 cines in multi-cine mode
  • Continuous recording
  • Memory gate
  • Event marking
  • Frame timestamp
  • IRIG In (modulated or unmodulated)
  • IRIG Out (unmodulated)
  • Image-Based Auto-Trigger (IBAT)
  • HD-SDI Video
  • Secondary IP address
  • Field-based firmware upgrade capable
Triggering
  • Programmable trigger location (pre/post trigger recording)
  • Image-Based Auto-Trigger standard
  • Trigger from software
  • Hardware trigger BNC on Miro Junction Box
Timing & Synchronization
  • Frame synchronization to internal or external clock (FSYNC)
  • IRIG In (modulated or unmodulated)
  • IRIG Out (unmodulated)
Signaling
  • System/Camera connector (Trigger, IRIG in, IRIG out, Ready, Aux, Ethernet) (Aux signal can be assigned to Event, Memgate or FSYNC)
Ethernet Connection
  • Gb Ethernet for control and data. Ethernet is accessed through the system cable.
Camera Control
  • Phantom Camera Control software (PCC)
  • Multi-Cam software
  • Remote Control Unit (RCU): Miro N-JB Base has "remote" connectors to connect to an RCU
  • SDK available
Video Out
  • HD-SDI available through BNC connector on the base
Lensing
  • M12/S mount
Video Processing
  • Brightness
  • Gain
  • Gamma
  • Saturation
  • Hue
  • White Balance
  • Color interpolation algorithm
  • Flare
  • Pedestal
  • Tone curve
  • Filters
  • Color matrix
  • Image flip and rotate
  • Crop
  • Scale
Data Acquisition
  • National Instruments M- and X-Series DAQ modules with integrated support in PCC
Motion Analysis
  • Basic measurements via Phantom Application:
  • Distance
  • Speed
  • Acceleration
  • Angles and Angular Speed
  • Manual and Automatic point collection for target tracking
  • Compatible with 3rd party solutions
Supported File Formats
  • Cine, Cine Compressed, Cine RAW, AVI, h.264 mp4, Apple ProRes .mov, Multipage TIFF, MXF PAL, MXF NTSC, Uncompressed QuickTime, Windows BMP, OS/2 BMP, PCX, TGA, TIFF, LEAD, JPEG, JTIF, RAW, DNG, DPX
Power
  • N5 Camera head: 16 - 32 VDC, 2.5 W, typical
  • BASE: 16 - 32 VDC, 10 W typical, 18W during battery charge.
  • Rechargeable battery in Base for back-up.
Mechanical Specifications
  • N5 Camera head: 32 x 32 x 28 mm (H x W x D) without lens, Weight: 0.2lb, 0.09kg
  • Base: 187 x 53 ½ x 75 mm (L x W x H), with Miro Jbox bolting pattern, Weight: 1.4lb, 0.64kg
Environmental Specifications
  • Miro N5 Head: Operating Temperature: 0°C - 50°C
  • Storage Temperature: -20°C to +70°C
  • Shock:150G IAW MIL-STD 202G (without lens)
  • Miro N-JB Base: Operating Temperature: 0°C - 50°C
  • Storage Temperature: -20°C to +70°C
  • Shock:170G IAW MIL-STD 202G
  • Vibe: 20.7Grms IAW MIL-STD 202G
APIs
  • Phantom SDK
  • LabView
  • MatLab
Ships Standard With
  • 6MM S-mount lens
  • Hex-L key
  • Locking Ring
  • Mounting Bracket
  • PCC software
  • Getting Started Guide
  • Cables and Power supply purchased separately with Miro Junction Box
Options
  • NA
Popular Accessories
  • Remote Control Unit
  • Miro Junction Box
  • Miro System cable
  • Ruggedized Ethernet
  • Control Breakout Box
  • 280W Power supply for Miro Junction Box

© Copyright 1999-2017 Vision Research Inc., All Rights Reserved Terms Of Use | Privacy Statement
100 Dey Rd. Wayne, NJ 07470, USA  | Tel: +1 973.696.4500 | Toll Free: 1.800.737.6588