Choose your language:

Miro C-Series Cameras

Phantom Miro C210J

  • 1,800 fps at 1280 x 1024
  • 12 bit, 1.3 megapixel CMOS sensor
  • ISO Color 640D*, 640T*; Mono 2500D*, 5000T; Adjustable
  • Hi-G: 170G Shock, 24 Grms Vibration
  • Small: 73 mm x 79 mm x 82.5 mm (H x W x D)
  • Modular: Connect to Miro Junction Box for multi-camera configurations

 

The Phantom® Miro® C210J is a small, light and rugged digital high-speed camera, designed to meet the most demanding applications. It has a 12 bit ½-inch CMOS sensor and achieves up to 1,800 frames per second (fps) at full resolution of 1280 x 1024. It is modular, and designed to be connected to a Miro Junction Box to create multi-camera configurations as simple or as complex as needed.

Small, light & rugged: At 73 mm x 79 mm x 82.5 mm (Miro C210J) and weighing just over 1 lb. (.5 kg), the C210J is a 3-inch cube small enough to fit into the tightest places.  Strategically placed mounting holes securely position the camera, even in difficult places. The C210J was tested at 170 G (IAW MIL-STD-202G) for shock, and 24 Grms (IAW MIL-STD-202G) for vibration, and is rugged enough to withstand the most challenging environments.

Image protection: The C210J is specifically designed to protect valuable images if a cable is severed during an experiment.  He camera has local memory, including an internal, non-removable 128G CineFlash® for image storage. It can be set to save all images immediately to the non-volatile CineFlash. An internal battery provides back-up power to allow images to be saved in the event AC power is lost.  

Modular and flexible: The Miro C210J is designed to operate through a single cable to Vision Research’s new Miro Junction Box (JBox). The JBox is a flexible hub designed not only to operate the cameras but to create almost any multi-camera configuration imaginable. Each JBox can accept up to six cameras, or use any one of the camera ports to daisy chain or tree branch to another JBox, significantly increasing the number of cameras in a configuration. The Miro C210, as well as other Phantom Miro cameras, can also connect to the Miro JBox, offering users additional configuration flexibility.

Motion Analysis:  The Miro C210J benefits from Vision Research Phantom Camera Control (PCC) software, including the motion analysis tools in the software.  PCC can perform timing, position, distance, velocity, angle and angular speed measurements and provide a full suite of calculations on the data.

What's in the Box...

  • PCC software and Getting started manual not included. Included with JBox

Link to C210J Service and Support page  

Resolution
FPS

Common resolutions and frame-rates, other resolutions available

Short Description
  • Small, light, and rugged, the Miro C210J meets the most difficult applications. It achieves 1,800 fps at full 1.3 Megapixel resolution of 1280 x 1024. With an internal battery and internal, non-removable CineFlash, important images are protected in the event AC power is interrupted or a cable is severed. The C210J is designed to operate with a Miro Junction Box, and can be modular: create multi-camera configurations as simple or complex as needed. Miro Junction Box specifications can be found in the Accessories section of the Vision Research web page.
Throughput/Speed
  • 2.3 Gpx/s Maximum speed at full resolution of 1280 x 1024 is 1,800 fps. Maximum speed at reduced resolution of 64 x 8 is 67,140 fps. Minimum frame rate at all resolutions is 100 fps.
Sensor Specifications
  • CMOS sensor
  • 1280 x 1024 pixels
  • 5.6 µm pixel size
  • 9.18 mm diagonal
  • 12-bit depth
  • ISO Monochrome 2,500D; 5,000T
  • Color 640D; 640T adjustable
Exposure
  • 5 µs minimum exposure
  • Auto Exposure
Memory
  • 8GB or 16GB internal RAM, 128GB internal, non-removable CineFlash
Record Times
  • 4.2 seconds at maximum frame rate, 12-bit depth, largest resolution and into maximum internal memory (16GB)
Special Features
  • Segment memory for up to 63 cines in multi-cine mode
  • Image-Based Auto-Trigger
  • Continuous recording
  • Memory gate
  • Event marking
  • Frame timestamp
  • IRIG In (modulated or unmodulated)
  • IRIG Out (unmodulated)
  • Secondary IP address
  • Field-based firmware upgrade capable
Triggering
  • Programmable trigger location (pre/post trigger recording)
  • Image-Based Auto-Trigger standard
  • Trigger from software
  • Hardware trigger BNC on MiniBob and Miro Junction Box
Timing & Synchronization
  • 20ns timing accuracy
  • Frame synchronization to internal or external clock (FSYNC)
  • IRIG In (modulated or unmodulated)
  • IRIG Out (unmodulated)
Signaling
  • System/Camera connector (Trigger, IRIG in, IRIG out, Ready, Aux, Ethernet) (Aux signal can be assigned to Event, Memgate or FSYNC)
Ethernet Connection
  • Gb Ethernet for control and data. Ethernet is accessed through the system cable.
Camera Control
  • Phantom Camera Control software (PCC)
  • Multi-Cam software
  • Remote Control Unit (RCU): Both C210J and C210 have "remote" connectors to connect to an RCU
  • SDK available
Video Out
  • HD-SDI available through DIN 1.0 / 2.3 connector on front of the cameras
Lensing
  • The C210 and C210J have 1" C-lens mounts that can be reversed to accept CS lenses.
Video Processing
  • Brightness
  • Gain
  • Gamma
  • Saturation
  • Hue
  • White Balance
  • Color interpolation algorithm
  • Flare
  • Pedestal
  • Tone curve
  • Filters
  • Color matrix
  • Image flip and rotate
  • Crop
  • Scale
Data Acquisition
  • National Instruments M- and X-Series DAQ modules with integrated support in PCC
Motion Analysis
  • Basic measurements via Phantom Application:
  • Distance
  • Speed
  • Acceleration
  • Angles and Angular Speed
  • Manual and Automatic point collection for target tracking
  • Compatible with 3rd party solutions
Supported File Formats
  • Cine, Cine Compressed, Cine RAW, AVI, h.264 mp4, Apple ProRes .mov, Multipage TIFF, MXF PAL, MXF NTSC, Uncompressed QuickTime, Windows BMP, OS/2 BMP, PCX, TGA, TIFF, LEAD, JPEG, JTIF, RAW, DNG, DPX
Power
  • Camera: 16 - 32 VDC, 12 W, 18W during battery charge.
  • Rechargeable battery for back-up.
  • Junction Box: 20 - 32 VDC, each camera port accepts 2 AMPS
Mechanical Specifications
  • 2.9 x 3.1 x 3.25 inches, 73 x 79 x 82.5 mm (H x W x D) without lens or lens mount. Weight: 1.2 lbs, 0.54 kg (without lens)
Environmental Specifications
  • Operating Temperature: 0°C - 50°C
  • Storage Temperature: -20°C to +70°C
  • Shock:170G IAW MIL-STD 202G (without lenses)
  • Vibration: 24 Grms, IAW MIL-STD 202G (without lenses)
APIs
  • Phantom SDK
  • LabView
  • MatLab
Ships Standard With
  • All cables purchased separately, Software included with Junction Box.
  • Junction Box:
  • PCC software
  • Non-sensing power pigtail
  • DIN 1.0/2.3 cable
Options
  • NA
Popular Accessories
  • Remote Control Unit
  • DIN 1.0 / 2.3 cable
  • Miro Junction Box
  • Ruggedized Ethernet
  • Control Breakout Box
  • 280W Power supply for Miro Junction Box

© Copyright 1999-2017 Vision Research Inc., All Rights Reserved Terms Of Use | Privacy Statement
100 Dey Rd. Wayne, NJ 07470, USA  | Tel: +1 973.696.4500 | Toll Free: 1.800.737.6588