Choose your language:

Phantom C-Series Cameras

Phantom Miro C110

  • 915 fps at 1280 x 1024, 1,295 fps at 1280 x 720
  • 12 bit, 1.3 megapixel CMOS sensor
  • ISO: Color 640D*, 640T* adjustable 
  • Monochrome 2500D*, 5000T
  • Standard BNC and Ethernet connectors
  • Small: 73 mm x 93 mm x 82.5 mm (H x W x D)
  • Cost Effective and Flexible

The Phantom® Miro® C110 is small but flexible, and one of Vision Research’s most Cost Effective cameras!  Its standard BNC and Ethernet connections, pixel format, and C-mount make it perfect for many applications, including microscopy applications. It has a 12 bit, 2/3-inch CMOS sensor and achieves up to 915 frames per second (fps) at full resolution of 1280 x 1024, and up to 52,445 fps at lower resolutions.  

Cost Effective: The Miro C110 offers the best value for everyday use in applications found everywhere.  From industrial trouble shooting to mechanical analysis to motion analysis, the Miro C110 provides the speed, image quality, and ease of use to tackle many common applications in a cost effective option.

Easy-to-Use Phantom Features: The C110 has 8GB of RAM and is available in either Monochrome or Color. It takes advantage of powerful Phantom Camera Control software, making an easy job out of capturing an event then adjusting cine characteristics for the best picture possible.  All cines can be saved converted to popular formats such as Quicktime or AVI, and single frames can be saved as JPEGs or TIFFs to easily share the information with colleagues. 

What's in the Box...

  • Power supply
  • Ethernet cable
  • PCC software
  • Getting Started Guide

* Measured according to ISO 12232:2006 method

 

Resolution
FPS

Common resolutions and frame-rates, other resolutions available

Short Description
  • Small, flexible, and easy to use, the Miro C110 is the perfect analytical tool. With a 1.3 Megapixel sensor, it achieve 915 frames-per-second (fps) at full 1280 x 1024 resolution, 1,295 fps at 720p HD, and up to 52,445 at reduced resolutions.
Throughput/Speed
  • 1.2 Gpx/second
  • Maximum speed at full resolution of 1280 x 1024 is 915 fps. Maximum speed at reduced resolution of 128 x 8 is 52,445 fps. Minimum frame rate at all resolutions is 50 fps.
Sensor Specifications
  • 2/3" CMOS sensor
  • 1280 x 1024 pixels
  • 5.6 µm pixel size
  • 9.18 mm diagonal
  • 12-bit depth
  • ISO Monochrome 2,500D; 5,000T
  • Color 640D; 640T adjustable
Exposure
  • 5 µs minimum exposure
  • Auto Exposure
Memory
  • 8GB internal RAM
Record Times
  • 4.4 seconds at maximum frame rate, 12-bit depth, largest resolution and into maximum internal memory (8GB)
Special Features
  • Segment memory for up to 63 cines in multi-cine mode
  • Image-Based Auto-Trigger
  • Continuous recording
  • Memory gate
  • Event marking
  • Frame timestamp
  • Quiet Fans
  • Secondary IP address
  • Field-based firmware upgrade capable
Triggering
  • Programmable trigger location (pre/post trigger recording)
  • Image-Based Auto-Trigger standard
  • Trigger from software
  • Hardware trigger BNC
Timing & Synchronization
  • 20ns timing accuracy
  • Frame synchronization to internal or external clock (FSYNC)
Signaling
  • Individuals BNC for Trigger, and two programmable BNC ports:
  • AUX 1 default setting: FSYNC
  • AUX 2 default setting: Strobe
Ethernet Connection
  • Gb Ethernet for control and data, using standard Ethernet connection
Camera Control
  • Phantom Camera Control software (PCC)
  • SDK available
Video Out
  • SDI available through BNC on the back of the camera
Lensing
  • 1" C-lens mounts, reversable to accept CS lenses.
Video Processing
  • Brightness
  • Gain
  • Gamma
  • Saturation
  • Hue
  • White Balance
  • Color interpolation algorithm
  • Flare
  • Pedestal
  • Tone curve
  • Filters
  • Color matrix
  • Image flip and rotate
  • Crop
  • Scale
Data Acquisition
  • National Instruments M- and X-Series DAQ modules with integrated support in PCC
Motion Analysis
  • Basic measurements via Phantom Application:
  • Distance
  • Speed
  • Acceleration
  • Angles and Angular Speed
  • Manual and Automatic point collection for target tracking
  • Compatible with 3rd party solutions
Supported File Formats
  • Cine, Cine Compressed, Cine RAW, AVI, h.264 mp4, Apple ProRes .mov, Multipage TIFF, MXF PAL, MXF NTSC, Uncompressed QuickTime, Windows BMP, OS/2 BMP, PCX, TGA, TIFF, LEAD, JPEG, JTIF, RAW, DNG, DPX
Power
  • 16 - 28 VDC, 12 W
  • 65 Watt 100 - 240 VAC power supply included
Mechanical Specifications
  • 2.9 x 3.65 x 3.25 inches, 73 x 93 x 82.5 mm (H x W x D)
  • Weight: 1.2 lbs, 0.54 kg
Environmental Specifications
  • Operating Temperature: 0°C - 50°C
  • Storage Temperature: -20°C to +70°C
APIs
  • Phantom SDK
  • LabView
  • MatLab
Ships Standard With
  • Power supply
  • Ethernet cable
  • BNC cable
  • Phantom PCC software
  • Getting Started Guide
Options
  • NA
Popular Accessories
  • Nothing - you're all set to go!

© Copyright 1999-2017 Vision Research Inc., All Rights Reserved Terms Of Use | Privacy Statement
100 Dey Rd. Wayne, NJ 07470, USA  | Tel: +1 973.696.4500 | Toll Free: 1.800.737.6588